features low cost diffused junction ultra fast switching for high efficiency low reverse leakage current low forward voltage drop high current capability the plastic material carries ul recognition 94v-0 features case: jedec do-201ae molded plastic weight: 1.04 grams polarity: color band denotes cathode end mounting position: any dimensions in inches and (millimeters) maximum ratings and electrical charactersitics ratings at 25 ambient temperature unless otherwise specified. single phase half-wave 60hz,resistive or inductive load, for capacitive load current derate by 20%. mur mur mur mur mur mur mur mur 405eg 410eg 415eg 420eg 440eg 460eg 480eg 4100eg maximum recurrent peak reverse voltage v rrm 50 100 150 200 400 600 800 1000 v maximum rms voltage v rms 35 70 105 140 280 420 550 700 v maximum dc blocking voltage v dc 50 100 150 200 400 600 800 1000 v maximum average forward rectified current 0.375?(9.5mm) lead length at t a =55 i (av) a peak forward surge current 8.3ms single half sinewave superimposed on rated load (jedec method) i fsm a maximum instantaneous forward voltage at 4.0a v f v maximum dc reverse current @t j =25 at rated dc bolcking voltage @t j =100 maximum reverse recovery time(note 1) t rr operating junction capacitance t j storage temperature range t stg note: measured with if=0.5a ir=1a irr=0.25a rev. 2, 13-mar-2017 a -55 to + 150 i r 150 mur405eg thru mur4100eg unit characteristics symbol ultra fast glass passivated rectifiers reverse voltage - 50 to 1000 volts forward current - 4.0 amperes 4.0 10 -55 to + 150 1 1.28 1.85 45 50 75 150 do-201ae min 1.0(25.4) 1.0(25.4) min .375(9.5) .335(8.5) .220(5.6) .197(5.0) dia. .042(1.06) .038(0.96) dia. .041(1.05) .037(0.95) dia.
rating and charactertic curves mur405eg thru mur4100eg the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 2, 13-mar-2017 fig. 1 ? forward current derating curve a mbient temperature ( ) a verage forward current amperes 1.6 0 0 3.2 4.8 25 50 75 100 125 150 0.8 2.4 4.0 single phase half wave 60hz resistive or inductive load fig. 2 ? maximum non-repetitive surge current number of cycles at 60hz peak forward surge current (amperes single half-sine-wave (jedec method) 200 150 100 50 0 10050 2010 12 5 0.1 0 1 10 0 0.2 0.4 0.6 0.8 1.2 1.61.4 1.0 1.8 fig.3-typical forward characteristics instantaneous forward current (amperes) instantaneous forward voltage ( volts ) fig.4-typical reverse characteristics percent rated peak reverse voltage,(%) instantaneous reverse current ( a ) 10000 1000 100 10 1 0 020 40 60 80 100 120 140 t j = 100c t j = 25c mur480eg- mur4100eg mur420eg- MUR460EG mur405eg- mur415eg tj=25c pulse width=300s 1%duty cycle
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
